Komatsu PC78US

2024 Komatsu PC78US with 1250 hours on the Meter: Unit Overview

Offered here is the 2024 Komatsu PC78US at 1250 hours, a 7.8 Tons unit that has passed the HMP unit-specific inspection before listing. The file includes the hour-meter evidence, where available for the hour reading and date-stamped photos of every checked item. Buyers can view the machine live on video after your enquiry is reviewed and receive a written CIF quote for Nigeria, Kenya or the wider region within the same window.

The Komatsu SAA4D95LE-5 Under the Hood

Power comes from the Komatsu SAA4D95LE-5, which is rated at 40.5 kW (55 HP). The unit meets Tier 3 / China Stage III and the engine identity is cross-checked against the chassis plate during the inspection. The drive system runs through the Full Hydrostatic, and the hour reading of 1250 hours is confirmed against the ECU log so the figure on the dashboard matches the recorded history. Oil pressure, coolant temperature and turbo response are logged in the report.

Excavation Envelope and Cycle Speeds

The excavation envelope of the Komatsu PC78US spans 4.68 m in depth and 7.24 m in reach, generating 68 kN of bucket breakout at 34.3 MPa system pressure. The machine carries the 0.28 m³ bucket and swings at 11.5 rpm. The audit verifies each work function against the OEM pressure window, and the results are photographed and dated in the HMP report.

Undercarriage and Track System

This Komatsu PC78US runs 450 mm shoes across 3.65 m of track at 32 kPa ground pressure. The undercarriage report records Good condition, healthy links and bushings (450 mm shoes), with each wear item measured and photographed. Track tension and alignment were set during the audit, and seal condition was checked on the rollers and idlers. The 7.8 Tons unit stays planted on fill and soft material with this footprint.

Cabin, Controls and Service Access

The cab is the ROPS / FOPS documented enclosed cab with air conditioning, and the operator environment is set up for sustained production. Fuel capacity is 410 L, and ground clearance of 440 mm handles rough site conditions. The machine is checked for control function, lighting and service access during the inspection. These are the daily-use details that show up on the first week of operation.

Where This Komatsu PC78US Works Best

In practice, this Komatsu PC78US covers port programs well, and HMP ships this class of excavator to buyers in Nigeria, Kenya and the wider region. The 7.8 Tons working weight and the 0.28 m³ configuration fit the production profile, and the audit report is available before any deposit. The unit is demonstrated live on camera before the export paperwork begins.

How This Komatsu PC78US Is Listed

The 2024 Komatsu PC78US ships with the dated HMP unit-specific inspection file: twelve pages of photographed and measured checks covering the engine, pumps, cylinder rods, swing bearing, undercarriage and the hour meter itself. The 1250 reading is backed by the hour-meter evidence, where available. A live video walk-around is arranged after your enquiry is reviewed, and third-party inspection can be booked at the yard if required.

Shipping This Komatsu PC78US: CIF Terms and Documents

Shipping this Komatsu PC78US under CIF covers ocean freight, port charges and the export document pack from Shanghai. The quote is issued in writing after your enquiry is reviewed and held for seven days. HMP confirms the destination requirements with the customs authority or the buyer's licensed broker before the vessel sails, and the inspection report travels with the shipment.

Maintenance History and Service Discipline

The 1250 hour reading on this 2024 Komatsu PC78US reflects a machine that has passed its first service cycle, and the maintenance record in the file documents the checks completed at the yard. The HMP report logs the engine oil analysis, filter condition and fluid levels with dated photos. For a used excavator, the value is in this paper trail, and it travels with the sale.

Buyer's Checklist: Testing This Komatsu PC78US Before You Commit

The checklist for this Komatsu PC78US is simple: review the unit-specific inspection material, verify the 1250 hour reading against the hour-meter evidence, where available, watch the live walk-around with the serial on camera, and confirm the CIF quote in writing. HMP arranges the live video after your enquiry is reviewed, and an independent inspection provider can survey the unit before loading. Payment is by TT only after the review is complete.

Cost Profile of the Komatsu PC78US

Running costs on this Komatsu PC78US are shaped by the 410 L fuel capacity and the service intervals documented in the file. The HMP report verifies the condition of the components that carry the first-year spend: filters, fluids, undercarriage and hydraulic seals. Buyers review this cost profile in the inspection file before payment.

Why This 2024 Komatsu PC78US Sits Where It Does in Value

A 2024 machine at 1250 hours has absorbed the heaviest early depreciation while the Komatsu SAA4D95LE-5 power unit stays inside its major overhaul window. That is the value position of this Komatsu PC78US: production capacity in the 7.8 Tons class at a price well below new-unit pricing, with the condition documented in the inspection file rather than left to a broker's description.

Maintenance Support for the Komatsu PC78US

Post-purchase support for this Komatsu PC78US includes parts sourcing through HMP's Shanghai, Guangzhou and Hong Kong accounts, and the Komatsu SAA4D95LE-5 service network keeps filters and wear items available in the region. The order is handled by a technical liaison who follows the machine through delivery and remains available for questions.

Excavation Deep-Dive: Cycle and Geometry

For port programs, the Komatsu PC78US cycles with a 0.28 m³ bucket at 11.5 rpm swing speed, digging to 4.68 m and reaching 7.24 m. The 68 kN breakout force clears tough material, and the circuit runs at 34.3 MPa. The walk-around video shows the machine working through these cycles, and the report documents the measured values.

Contract, Payment and Regional Backing

For buyers in Nigeria, Kenya and the wider region, the transaction is structured the same way: the report and video review come first, the signed contract states the terms, and payment by TT follows. The balance is settled against the export documents, and the post-sale support scope, where offered, is written into the signed contract. The technical liaison stays on the order through delivery.

Operator Experiences and Fit Signals

This 2024 Komatsu PC78US fits buyers running port programs who want a documented machine rather than a speculative listing: fleets in Nigeria, Kenya and the wider region that standardize on the 7.8 Tons class, contractors upgrading from smaller units, and operators who need the Komatsu SAA4D95LE-5 power and the inspection file before paying. Operators describe the class as predictable in the working cycle, with the report confirming the machine's actual state.

Financing Sequence and Documentation Flow

The financing sequence for this Komatsu PC78US is transparent: the CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days, the deposit is paid by TT after the file review, and the balance follows the export documents. The signed contract states the terms, and the buyer keeps the inspection report as part of the sale package.

What Arrives with the Machine

With this Komatsu PC78US, the buyer receives the machine, the export documentation pack, the dated inspection report, and the maintenance schedule. The hour-meter evidence, where available for the 1250 reading and the ECU scan results are part of the file. The technical liaison remains available after delivery for parts and service questions.

Comparing the Paperwork Before You Decide

Buyers evaluating this Komatsu PC78US against other listings in the 7.8 Tons class should compare the paperwork first: the dated inspection file, the hour-meter evidence, where available on the 1250 reading, and the written CIF quote. HMP prepares all three before the deposit is paid, and the machine is shown live on camera during the review.

Buyer Support Timeline from Inquiry to Delivery

The support timeline runs from inquiry to delivery without gaps: the CIF quote lands after your enquiry is reviewed, the file review and live walk-around follow inside a week, the deposit is paid by TT, and the unit loads on an available sailing schedule. The technical liaison reports the status at each step for buyers in Nigeria, Kenya and the wider region.

Sailing Schedule and Transit Windows

Weather and seasonality rarely delay this class of shipment from Shanghai: the unit loads on an available sailing schedule after the contract is signed, and the transit time to Nigeria, Kenya or the wider region is stated in the written CIF quote. Port charges and documentation are itemized in the same document.

Resale Position of the 7.8 Tons Class

The resale position of the 7.8 Tons class supports this purchase: demand for documented, low-hour machines in Nigeria, Kenya and the wider region keeps resale values stable, and the 2024 build at 1250 hours with the Komatsu SAA4D95LE-5 power unit sits in the most traded bracket of the class. The inspection file travels with the machine to the next owner.