Sany SY65C

The 2024 Sany SY65C in the 6.5 Tons Class: Overview

The listing covers a 2024 Sany SY65C at 1300 hours, configured as a 6.5 Tons unit. The HMP unit-specific pre-purchase inspection was completed before listing, and the report travels with the sale. Buyers in Nigeria, Kenya and the wider region can review the file first, watch the machine live on camera, and only then decide on deposit, which is how a used excavator purchase should work.

Engine, Emissions and Drive System

The machine runs the Kubota V2607-DI-T at 43 kW (58 HP), with the Tier 3 / China Stage III rating stated in the inspection file. The engine serial number is matched to the chassis during the audit, and the drive system is the Full Hydrostatic. At 1300 hours, the power unit sits inside its major service window, and the report documents the running pressures and temperatures measured during the inspection.

Digging Performance: Depth, Reach and Breakout

The excavation envelope of the Sany SY65C spans 4.68 m in depth and 7.24 m in reach, generating 68 kN of bucket breakout at 34.3 MPa system pressure. The machine carries the 0.26 m³ bucket and swings at 11.5 rpm. The audit verifies each work function against the OEM pressure window, and the results are photographed and dated in the HMP report.

Track Running Gear: Shoes, Length and Pressure

Track figures for the Sany SY65C: 450 mm shoes, 3.65 m track length and 32 kPa ground pressure. The inspection records the undercarriage condition as Good condition, healthy links and bushings (450 mm shoes), with wear measurements photographed and dated. Track tension was set during the audit, and the rollers and idlers were checked for seal condition. The 6.5 Tons machine carries its mass on this running gear.

Cabin, Controls and Service Access

Inside, the Sany SY65C offers the ROPS / FOPS documented enclosed cab with air conditioning and a control layout suited to full-shift work. The 410 L fuel tank keeps the machine working through long cycles, and 440 mm of ground clearance clears typical site obstructions. The audit verifies the operator station functions, lighting and service access, with the findings photographed and dated in the file.

Where This Sany SY65C Works Best

In practice, this Sany SY65C covers port programs well, and HMP ships this class of excavator to buyers in Nigeria, Kenya and the wider region. The 6.5 Tons working weight and the 0.26 m³ configuration fit the production profile, and the audit report is available before any deposit. The unit is demonstrated live on camera before the export paperwork begins.

How This Sany SY65C Is Listed

The 2024 Sany SY65C ships with the dated HMP unit-specific inspection file: twelve pages of photographed and measured checks covering the engine, pumps, cylinder rods, swing bearing, undercarriage and the hour meter itself. The 1300 reading is backed by the hour-meter evidence, where available. A live video walk-around is arranged after your enquiry is reviewed, and third-party inspection can be booked at the yard if required.

Shipping This Sany SY65C: CIF Terms and Documents

The CIF quote for this Sany SY65C is itemized: ocean freight, port handling, documentation and insurance, confirmed after your enquiry is reviewed and locked for seven days. The machine ships from Shanghai with the full export packet, and the commercial invoice, packing list and bill of lading are prepared per the destination. Status updates are shared during transit.

Service Records and Component History

This 2024 Sany SY65C at 1300 hours carries a documented service record. The audit file logs the oil and coolant analysis, filter service and fluid levels, with date-stamped photos of each check. The maintenance history is part of the sale package, so the buyer knows exactly what was done at the yard before the machine was listed.

Buyer's Checklist: Testing This Sany SY65C Before You Commit

Before committing to this Sany SY65C, confirm: the hour reading of 1300 hours against the hour-meter evidence, where available, the engine serial against the chassis plate, the dated inspection photos, and the CIF quotation for your port. The live walk-around is arranged after your enquiry is reviewed, and the rate is held for seven days while you complete your checks.

Running Costs: Fuel, Service and Wear Items

In the 6.5 Tons class, operating cost is driven by fuel burn, service parts and wear components. This Sany SY65C carries a 410 L fuel tank and a documented service history, and the audit file photographs the condition of the wear items. The buyer sees the full cost profile before the deposit is paid.

Why This 2024 Sany SY65C Sits Where It Does in Value

This 2024 Sany SY65C at 1300 hours has passed its break-in and first service cycle while absorbing the largest depreciation step. The Kubota V2607-DI-T and the working components remain inside their service horizon, and the machine is priced against its documented condition. Buyers in the 6.5 Tons class get the production capacity at a fraction of new-unit cost.

Service Schedule and Parts Availability

Service support for the Sany SY65C continues after the sale: HMP sources parts through its Shanghai, Guangzhou and Hong Kong trade accounts, and the Kubota V2607-DI-T family has distributor coverage in the target markets. The service schedule is documented in the file, and the technical liaison stays on the order through delivery.

Dig Cycle Analysis for the Sany SY65C

For port programs, the Sany SY65C cycles with a 0.26 m³ bucket at 11.5 rpm swing speed, digging to 4.68 m and reaching 7.24 m. The 68 kN breakout force clears tough material, and the circuit runs at 34.3 MPa. The walk-around video shows the machine working through these cycles, and the report documents the measured values.

Contract, Payment and Regional Backing

For buyers in Nigeria, Kenya and the wider region, the transaction is structured the same way: the report and video review come first, the signed contract states the terms, and payment by TT follows. The balance is settled against the export documents, and the post-sale support scope, where offered, is written into the signed contract. The technical liaison stays on the order through delivery.

Is the Sany SY65C Right for Your Program

Operators running this class of excavator report consistent control response and a comfortable working station, which shows up as steady production across port programs. For buyers in Nigeria, Kenya and the wider region, the deciding factor is the file: 1300 documented hours, the Kubota V2607-DI-T engine, and the dated inspection report that ships with the 6.5 Tons machine.

Site Logistics and Pre-Delivery Preparation

Site preparation for this Sany SY65C is straightforward: the machine lands with the export documentation pack, and the buyer's customs agent clears the unit against the destination rules. HMP shares the container status during transit and confirms the port requirements before loading. For buyers in Nigeria, Kenya and the wider region, the arrival process is documented end to end.

Financing Sequence and Documentation Flow

The financing sequence for this Sany SY65C is transparent: the CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days, the deposit is paid by TT after the file review, and the balance follows the export documents. The signed contract states the terms, and the buyer keeps the inspection report as part of the sale package.

Resale Position of the 6.5 Tons Class

The resale position of the 6.5 Tons class supports this purchase: demand for documented, low-hour machines in Nigeria, Kenya and the wider region keeps resale values stable, and the 2024 build at 1300 hours with the Kubota V2607-DI-T power unit sits in the most traded bracket of the class. The inspection file travels with the machine to the next owner.

Spare Parts Picture for the Sany SY65C

The spare-parts picture for this Sany SY65C is covered through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, and the Kubota V2607-DI-T family has distributor stock in the main target markets. The maintenance schedule provided with the sale lists the service intervals and the parts that fall due at each stage.

Fleet Standardization on the 6.5 Tons Class

For fleet managers standardizing on the 6.5 Tons class, this Sany SY65C is a repeatable unit: the 2024 build at 1300 hours, the Kubota V2607-DI-T powertrain and the 0.26 m³ bucket cover the standard program, and the inspection file makes the condition review fast. The machine can be added to an existing order cycle without special handling.

What Arrives with the Machine

With this Sany SY65C, the buyer receives the machine, the export documentation pack, the dated inspection report, and the maintenance schedule. The hour-meter evidence, where available for the 1300 reading and the ECU scan results are part of the file. The technical liaison remains available after delivery for parts and service questions.