Volvo EC480

Buying the 2023 Volvo EC480: Condition, Hours and Configuration

The listing covers a 2023 Volvo EC480 at 1300 hours, configured as a 48.5 Tons unit. The HMP unit-specific pre-purchase inspection was completed before listing, and the report travels with the sale. Buyers in Africa, Latin America and Middle East can review the file first, watch the machine live on camera, and only then decide on deposit, which is how a used excavator purchase should work.

The Volvo D13E Under the Hood

The Volvo D13E delivers 265 kW (355 HP) in this 2023 Volvo EC480. The power unit is inspected for compression, pressure and temperature performance, with results logged in the dated report. The machine meets Tier 3 / China Stage III, uses the Full Hydrostatic, and the hour meter's 1300 hours reading is confirmed against the ECU history as part of the audit process.

Excavation Envelope and Cycle Speeds

On the dig cycle, this Volvo EC480 reaches 4.68 m below grade with 7.24 m of horizontal reach and 68 kN of bucket force. The hydraulic system operates at 34.3 MPa, and the 2.5 m³ bucket is the standard fitment. Swing speed of 11.5 rpm keeps the loader cycle flowing. The inspection documents hydraulic pressures at every function with time-stamped readings.

Track Running Gear: Shoes, Length and Pressure

This Volvo EC480 runs 450 mm shoes across 3.65 m of track at 32 kPa ground pressure. The undercarriage report records Good condition, healthy links and bushings (450 mm shoes), with each wear item measured and photographed. Track tension and alignment were set during the audit, and seal condition was checked on the rollers and idlers. The 48.5 Tons unit stays planted on fill and soft material with this footprint.

Cabin, Controls and Service Access

The operator station is the ROPS / FOPS documented enclosed cab with air conditioning. The controls are laid out for daily cycles, and the machine is set up for full-shift work. The fuel tank holds 410 L, which supports long working days without refueling stops on most sites, and ground clearance of 440 mm suits uneven terrain. Daily service points are accessible for the routine checks that keep a 48.5 Tons machine in the fleet productive.

Applications and Markets for This excavator

The Volvo EC480 is configured for mining and quarry and trenching work, and HMP has active sales into Africa, Latin America and Middle East for this machine class. The 2.5 m³ bucket and the 48.5 Tons platform match the standard duty cycles, and the inspection file documents the machine's condition for buyers who cannot fly to the yard. The machine can be shown live on video, and the written quote is confirmed after your enquiry is reviewed.

Inspection File and Verification

Verification for this Volvo EC480 works in layers: the dated unit-specific inspection material, the hour-meter evidence, where available on the 1300 hour reading, and a live walk-around where the serial number and meter are shown on camera. The engine serial is cross-checked against the chassis plate. An an independent inspection may be coordinated when the inspector, yard access, and buyer requirements allow before loading for buyers who want an independent opinion.

Shipping This Volvo EC480: CIF Terms and Documents

The CIF quote for this Volvo EC480 is itemized: ocean freight, port handling, documentation and insurance, confirmed after your enquiry is reviewed and locked for seven days. The machine ships from Shanghai with the full export packet, and the commercial invoice, packing list and bill of lading are prepared per the destination. Status updates are shared during transit.

Service Records and Component History

The 1300 hour reading on this 2023 Volvo EC480 reflects a machine that has passed its first service cycle, and the maintenance record in the file documents the checks completed at the yard. The HMP report logs the engine oil analysis, filter condition and fluid levels with dated photos. For a used excavator, the value is in this paper trail, and it travels with the sale.

Pre-Purchase Checklist for the Volvo EC480

The checklist for this Volvo EC480 is simple: review the unit-specific inspection material, verify the 1300 hour reading against the hour-meter evidence, where available, watch the live walk-around with the serial on camera, and confirm the CIF quote in writing. HMP arranges the live video after your enquiry is reviewed, and an independent inspection provider can survey the unit before loading. Payment is by TT only after the review is complete.

Operating Costs That Matter in This Class

Running costs on this Volvo EC480 are shaped by the 410 L fuel capacity and the service intervals documented in the file. The HMP report verifies the condition of the components that carry the first-year spend: filters, fluids, undercarriage and hydraulic seals. Buyers review this cost profile in the inspection file before payment.

Why This 2023 Volvo EC480 Sits Where It Does in Value

This 2023 Volvo EC480 at 1300 hours has passed its break-in and first service cycle while absorbing the largest depreciation step. The Volvo D13E and the working components remain inside their service horizon, and the machine is priced against its documented condition. Buyers in the 48.5 Tons class get the production capacity at a fraction of new-unit cost.

Parts and Service Support After Delivery

Service support for the Volvo EC480 continues after the sale: HMP sources parts through its Shanghai, Guangzhou and Hong Kong trade accounts, and the Volvo D13E family has distributor coverage in the target markets. The service schedule is documented in the file, and the technical liaison stays on the order through delivery.

The Volvo EC480 in Continuous Production

The production profile of this Volvo EC480 is built around the 2.5 m³ bucket and the swing rate of 11.5 rpm. The machine digs to 4.68 m and loads through 7.24 m of reach with 68 kN of force at the bucket. The hydraulic system at 34.3 MPa is function-tested in the audit, and the cycle figures are the ones recorded in the file.

How the Purchase Works: Steps and Support

The sales process for this Volvo EC480 is documented at every step: inspection file, live video, signed contract, TT deposit, and balance against shipping documents. CIF pricing is confirmed in writing after your enquiry is reviewed and held for seven days. Regional support for Africa, Latin America and Middle East buyers includes parts sourcing and the technical liaison after delivery.

Who Should Buy This Machine: Fit Indicators

This Volvo EC480 is the right pick when the program needs mining and quarry and trenching duty in the 48.5 Tons class, when the buyer cannot inspect the yard personally, and when the decision depends on documented condition. The 2023 build at 1300 hours, the Volvo D13E power unit and the full inspection file cover those requirements, and the machine is shown live on camera before payment.

Buyer Support Timeline from Inquiry to Delivery

The support timeline runs from inquiry to delivery without gaps: the CIF quote lands after your enquiry is reviewed, the file review and live walk-around follow inside a week, the deposit is paid by TT, and the unit loads on an available sailing schedule. The technical liaison reports the status at each step for buyers in Africa, Latin America and Middle East.

Documentation Pack and Customs Clearance

Customs clearance for this Volvo EC480 in Africa, Latin America or Middle East starts with the export packet HMP prepares at the yard: commercial invoice, packing list, bill of lading and the certificate of origin. The buyer's broker confirms the duty and age rules against the current schedule, and HMP shares the container documents as soon as they are issued.

Spare Parts Picture for the Volvo EC480

The spare-parts picture for this Volvo EC480 is covered through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, and the Volvo D13E family has distributor stock in the main target markets. The maintenance schedule provided with the sale lists the service intervals and the parts that fall due at each stage.

Resale Position of the 48.5 Tons Class

The resale position of the 48.5 Tons class supports this purchase: demand for documented, low-hour machines in Africa, Latin America and Middle East keeps resale values stable, and the 2023 build at 1300 hours with the Volvo D13E power unit sits in the most traded bracket of the class. The inspection file travels with the machine to the next owner.

Comparing the Paperwork Before You Decide

Buyers evaluating this Volvo EC480 against other listings in the 48.5 Tons class should compare the paperwork first: the dated inspection file, the hour-meter evidence, where available on the 1300 reading, and the written CIF quote. HMP prepares all three before the deposit is paid, and the machine is shown live on camera during the review.

Site Logistics and Pre-Delivery Preparation

Site preparation for this Volvo EC480 is straightforward: the machine lands with the export documentation pack, and the buyer's customs agent clears the unit against the destination rules. HMP shares the container status during transit and confirms the port requirements before loading. For buyers in Africa, Latin America and Middle East, the arrival process is documented end to end.