Komatsu PC220 (Standard)

The 2023 Komatsu PC220 (Standard) in the 22 Tons Class: Overview

This Komatsu PC220 (Standard) is a 2023 build showing 1200 hours on the meter, with the available hour-meter evidence in the file. It is a 22 Tons machine in the excavator class, and the unit sits in the Shanghai yard with a dated available unit-specific inspection material ready to share. For buyers comparing excavator listings, the difference here is the paper trail: the hour reading is documented, the inspection photos are date-stamped, and the machine can be demonstrated live before any commitment.

Engine and Powertrain: Komatsu SAA6D107E-1

Power comes from the Komatsu SAA6D107E-1, which is rated at 125 kW (168 HP). The unit meets Tier 3 / China Stage III and the engine identity is cross-checked against the chassis plate during the inspection. The drive system runs through the Full Hydrostatic, and the hour reading of 1200 hours is confirmed against the ECU log so the figure on the dashboard matches the recorded history. Oil pressure, coolant temperature and turbo response are logged in the report.

Hydraulics and Excavation Figures

The Komatsu PC220 (Standard) is documented for 4.68 m of dig depth, 7.24 m of reach and 68 kN of bucket force at 34.3 MPa pressure. With the 1.0 m³ bucket fitted and a swing rate of 11.5 rpm, the machine holds a steady production cycle in bulk and trench work. Hydraulic pressures are logged per function in the inspection report, and the values are confirmed against the OEM spec sheet.

Undercarriage and Track System

This Komatsu PC220 (Standard) runs 450 mm shoes across 3.65 m of track at 32 kPa ground pressure. The undercarriage report records Good condition, healthy links and bushings (450 mm shoes), with each wear item measured and photographed. Track tension and alignment were set during the audit, and seal condition was checked on the rollers and idlers. The 22 Tons unit stays planted on fill and soft material with this footprint.

Cabin, Controls and Service Access

The cab is the ROPS / FOPS documented enclosed cab with air conditioning, and the operator environment is set up for sustained production. Fuel capacity is 410 L, and ground clearance of 440 mm handles rough site conditions. The machine is checked for control function, lighting and service access during the inspection. These are the daily-use details that show up on the first week of operation.

Where This Komatsu PC220 (Standard) Works Best

The Komatsu PC220 (Standard) is configured for port work, and HMP has active sales into Nigeria, Kenya and the wider region for this machine class. The 1.0 m³ bucket and the 22 Tons platform match the standard duty cycles, and the inspection file documents the machine's condition for buyers who cannot fly to the yard. The machine can be shown live on video, and the written quote is confirmed after your enquiry is reviewed.

The HMP unit-specific inspection and What Ships in the File

The 2023 Komatsu PC220 (Standard) ships with the dated HMP unit-specific inspection file: twelve pages of photographed and measured checks covering the engine, pumps, cylinder rods, swing bearing, undercarriage and the hour meter itself. The 1200 reading is backed by the hour-meter evidence, where available. A live video walk-around is arranged after your enquiry is reviewed, and third-party inspection can be booked at the yard if required.

Freight, Documents and Delivery from Shanghai

The CIF quote for this Komatsu PC220 (Standard) is itemized: ocean freight, port handling, documentation and insurance, confirmed after your enquiry is reviewed and locked for seven days. The machine ships from Shanghai with the full export packet, and the commercial invoice, packing list and bill of lading are prepared per the destination. Status updates are shared during transit.

Maintenance Story of This Komatsu PC220 (Standard)

Service history for this Komatsu PC220 (Standard) is recorded in the inspection file: the 1200 hours on the meter are supported by the hour-meter evidence, where available, and the yard records show the maintenance completed before listing. The report includes dated photographs of the service points, fluid analysis results and the component checks. Buyers review the file before payment.

What to Verify on This Komatsu PC220 (Standard) Before Payment

Buyers of this 2023 Komatsu PC220 (Standard) typically complete four steps: inspect the dated file, check the meter reading of 1200 hours against the hour-meter evidence, where available, view the machine live on camera, and receive the written CIF quote. The inspection report and the walk-around video are the evidence package, and the deposit is paid only after the buyer has reviewed both.

Running Costs: Fuel, Service and Wear Items

Running costs on this Komatsu PC220 (Standard) are shaped by the 410 L fuel capacity and the service intervals documented in the file. The HMP report verifies the condition of the components that carry the first-year spend: filters, fluids, undercarriage and hydraulic seals. Buyers review this cost profile in the inspection file before payment.

The Value Story: 1200 Hours on a 2023 Model

The 1200 hour reading on this 2023 Komatsu PC220 (Standard) sits inside the first major service cycle, which is where used buyers in the 22 Tons class see the best balance of condition and price. The Komatsu SAA6D107E-1 powertrain keeps nearly all of its working life, and the inspection file documents the machine's actual state before any deposit.

Parts and Service Support After Delivery

After delivery, parts sourcing for this Komatsu PC220 (Standard) runs through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, covering consumables and service items for buyers in Nigeria, Kenya and the wider region. The Komatsu SAA6D107E-1 engine family is well stocked by regional distributors, which keeps routine service straightforward. The technical liaison on the order answers maintenance questions after the machine lands.

Excavation Deep-Dive: Cycle and Geometry

The production profile of this Komatsu PC220 (Standard) is built around the 1.0 m³ bucket and the swing rate of 11.5 rpm. The machine digs to 4.68 m and loads through 7.24 m of reach with 68 kN of force at the bucket. The hydraulic system at 34.3 MPa is function-tested in the audit, and the cycle figures are the ones recorded in the file.

Transaction Structure and Regional Support

For buyers in Nigeria, Kenya and the wider region, the transaction is structured the same way: the report and video review come first, the signed contract states the terms, and payment by TT follows. The balance is settled against the export documents, and the post-sale support scope, where offered, is written into the signed contract. The technical liaison stays on the order through delivery.

Who Should Buy This Machine: Fit Indicators

This 2023 Komatsu PC220 (Standard) fits buyers running port programs who want a documented machine rather than a speculative listing: fleets in Nigeria, Kenya and the wider region that standardize on the 22 Tons class, contractors upgrading from smaller units, and operators who need the Komatsu SAA6D107E-1 power and the inspection file before paying. Operators describe the class as predictable in the working cycle, with the report confirming the machine's actual state.

Spare Parts Picture for the Komatsu PC220 (Standard)

The spare-parts picture for this Komatsu PC220 (Standard) is covered through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, and the Komatsu SAA6D107E-1 family has distributor stock in the main target markets. The maintenance schedule provided with the sale lists the service intervals and the parts that fall due at each stage.

Financing Sequence and Documentation Flow

The financing sequence for this Komatsu PC220 (Standard) is transparent: the CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days, the deposit is paid by TT after the file review, and the balance follows the export documents. The signed contract states the terms, and the buyer keeps the inspection report as part of the sale package.

Resale Position of the 22 Tons Class

The resale position of the 22 Tons class supports this purchase: demand for documented, low-hour machines in Nigeria, Kenya and the wider region keeps resale values stable, and the 2023 build at 1200 hours with the Komatsu SAA6D107E-1 power unit sits in the most traded bracket of the class. The inspection file travels with the machine to the next owner.

Rental Comparison and Ownership Math

Comparing this Komatsu PC220 (Standard) against rental over a full season, the ownership math favors the machine when utilization is steady: the 22 Tons class unit carries its own maintenance record, and the inspection file removes the condition risk that usually drives the rental-versus-buy decision. The Komatsu SAA6D107E-1 powertrain and the documented 1200 hours support that calculation.

Fleet Standardization on the 22 Tons Class

For fleet managers standardizing on the 22 Tons class, this Komatsu PC220 (Standard) is a repeatable unit: the 2023 build at 1200 hours, the Komatsu SAA6D107E-1 powertrain and the 1.0 m³ bucket cover the standard program, and the inspection file makes the condition review fast. The machine can be added to an existing order cycle without special handling.