Komatsu PC110

The 2023 Komatsu PC110 at 1600 hours: What You Are Buying

The Komatsu PC110 on offer is a 2023 machine with 1600 hours recorded and listed. It belongs to the 11 Tons class of the excavator range, and the inspection file documents the engine, hydraulics, running gear and meter with dated photos. A live video walk-around is available after your enquiry is reviewed, and the written CIF quote for the destination is held for seven days.

Power Unit and Drivetrain Details

Power comes from the Komatsu SAA4D95LE-5, which is rated at 66 kW (88.5 HP). The unit meets Tier 3 / China Stage III and the engine identity is cross-checked against the chassis plate during the inspection. The drive system runs through the Full Hydrostatic, and the hour reading of 1600 hours is confirmed against the ECU log so the figure on the dashboard matches the recorded history. Oil pressure, coolant temperature and turbo response are logged in the report.

Hydraulics and Excavation Figures

On the dig cycle, this Komatsu PC110 reaches 4.68 m below grade with 7.24 m of horizontal reach and 68 kN of bucket force. The hydraulic system operates at 34.3 MPa, and the 0.45 m³ bucket is the standard fitment. Swing speed of 11.5 rpm keeps the loader cycle flowing. The inspection documents hydraulic pressures at every function with time-stamped readings.

Chassis and Crawler Condition

Track figures for the Komatsu PC110: 450 mm shoes, 3.65 m track length and 32 kPa ground pressure. The inspection records the undercarriage condition as Good condition, healthy links and bushings (450 mm shoes), with wear measurements photographed and dated. Track tension was set during the audit, and the rollers and idlers were checked for seal condition. The 11 Tons machine carries its mass on this running gear.

Cabin, Controls and Service Access

The cab is the ROPS / FOPS documented enclosed cab with air conditioning, and the operator environment is set up for sustained production. Fuel capacity is 410 L, and ground clearance of 440 mm handles rough site conditions. The machine is checked for control function, lighting and service access during the inspection. These are the daily-use details that show up on the first week of operation.

Suitable Programs and Target Regions

For utility and port programs, the Komatsu PC110 brings the 11 Tons class and the 0.45 m³ configuration, with sales history into Nigeria, Kenya and the wider region. The machine is inspected under the HMP unit-specific protocol before listing, the file is shared with the buyer, and a live walk-around is arranged after your enquiry is reviewed. The quote is confirmed in writing and held for seven days.

How This Komatsu PC110 Is Listed

Verification for this Komatsu PC110 works in layers: the dated unit-specific inspection material, the hour-meter evidence, where available on the 1600 hour reading, and a live walk-around where the serial number and meter are shown on camera. The engine serial is cross-checked against the chassis plate. An an independent inspection may be coordinated when the inspector, yard access, and buyer requirements allow before loading for buyers who want an independent opinion.

Freight, Documents and Delivery from Shanghai

Shipping this Komatsu PC110 under CIF covers ocean freight, port charges and the export document pack from Shanghai. The quote is issued in writing after your enquiry is reviewed and held for seven days. HMP confirms the destination requirements with the customs authority or the buyer's licensed broker before the vessel sails, and the inspection report travels with the shipment.

Maintenance History and Service Discipline

Service history for this Komatsu PC110 is recorded in the inspection file: the 1600 hours on the meter are supported by the hour-meter evidence, where available, and the yard records show the maintenance completed before listing. The report includes dated photographs of the service points, fluid analysis results and the component checks. Buyers review the file before payment.

Buyer's Checklist: Testing This Komatsu PC110 Before You Commit

Buyers of this 2023 Komatsu PC110 typically complete four steps: inspect the dated file, check the meter reading of 1600 hours against the hour-meter evidence, where available, view the machine live on camera, and receive the written CIF quote. The inspection report and the walk-around video are the evidence package, and the deposit is paid only after the buyer has reviewed both.

Running Costs: Fuel, Service and Wear Items

The cost profile of this 2023 Komatsu PC110 is anchored by the 410 L tank and the documented service record. The inspection file itemizes the condition of the wear items and the completed service work, so the first-year operating budget is based on facts rather than guesses. That is the practical value of buying a machine with a full report.

The Value Story: 1600 Hours on a 2023 Model

This 2023 Komatsu PC110 at 1600 hours has passed its break-in and first service cycle while absorbing the largest depreciation step. The Komatsu SAA4D95LE-5 and the working components remain inside their service horizon, and the machine is priced against its documented condition. Buyers in the 11 Tons class get the production capacity at a fraction of new-unit cost.

Maintenance Support for the Komatsu PC110

Service support for the Komatsu PC110 continues after the sale: HMP sources parts through its Shanghai, Guangzhou and Hong Kong trade accounts, and the Komatsu SAA4D95LE-5 family has distributor coverage in the target markets. The service schedule is documented in the file, and the technical liaison stays on the order through delivery.

Excavation Deep-Dive: Cycle and Geometry

For utility and port programs, the Komatsu PC110 cycles with a 0.45 m³ bucket at 11.5 rpm swing speed, digging to 4.68 m and reaching 7.24 m. The 68 kN breakout force clears tough material, and the circuit runs at 34.3 MPa. The walk-around video shows the machine working through these cycles, and the report documents the measured values.

How the Purchase Works: Steps and Support

The purchase runs in a fixed sequence: review the inspection file, watch the live walk-around, sign the sales contract, pay the deposit by TT, and settle the balance against the export documents. The CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days. The technical liaison assigned to the order follows the machine to delivery and remains available for buyers in Nigeria, Kenya and the wider region.

Who Should Buy This Machine: Fit Indicators

Operators running this class of excavator report consistent control response and a comfortable working station, which shows up as steady production across utility and port programs. For buyers in Nigeria, Kenya and the wider region, the deciding factor is the file: 1600 documented hours, the Komatsu SAA4D95LE-5 engine, and the dated inspection report that ships with the 11 Tons machine.

Documentation Pack and Customs Clearance

Customs clearance for this Komatsu PC110 in Nigeria, Kenya or the wider region starts with the export packet HMP prepares at the yard: commercial invoice, packing list, bill of lading and the certificate of origin. The buyer's broker confirms the duty and age rules against the current schedule, and HMP shares the container documents as soon as they are issued.

Rental Comparison and Ownership Math

Comparing this Komatsu PC110 against rental over a full season, the ownership math favors the machine when utilization is steady: the 11 Tons class unit carries its own maintenance record, and the inspection file removes the condition risk that usually drives the rental-versus-buy decision. The Komatsu SAA4D95LE-5 powertrain and the documented 1600 hours support that calculation.

Spare Parts Picture for the Komatsu PC110

The spare-parts picture for this Komatsu PC110 is covered through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, and the Komatsu SAA4D95LE-5 family has distributor stock in the main target markets. The maintenance schedule provided with the sale lists the service intervals and the parts that fall due at each stage.

Fleet Standardization on the 11 Tons Class

For fleet managers standardizing on the 11 Tons class, this Komatsu PC110 is a repeatable unit: the 2023 build at 1600 hours, the Komatsu SAA4D95LE-5 powertrain and the 0.45 m³ bucket cover the standard program, and the inspection file makes the condition review fast. The machine can be added to an existing order cycle without special handling.

Operating Season and Utilization Planning

The operating season for this Komatsu PC110 in Nigeria, Kenya and the wider region determines when to place the order: machines ordered ahead of the wet season arrive in time for the peak working months, while off-season orders ship with shorter lead times. HMP confirms the sailing date in the written CIF quote before any funds move.

Financing Sequence and Documentation Flow

The financing sequence for this Komatsu PC110 is transparent: the CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days, the deposit is paid by TT after the file review, and the balance follows the export documents. The signed contract states the terms, and the buyer keeps the inspection report as part of the sale package.