Komatsu PC240

The 2023 Komatsu PC240 at 1800 hours: What You Are Buying

This 2023 Komatsu PC240 presents 1800 documented hours on a 24 Tons platform. The machine carries the available unit-specific inspection material with dated photographs, the hour meter is backed by rollback detection, and a live walk-around is arranged after your enquiry is reviewed of request. The unit is ready for export from Shanghai, and the CIF price is confirmed in writing for the destination port.

Engine, Emissions and Drive System

Power comes from the Komatsu SAA6D107E-1, which is rated at 132 kW (177 HP). The unit meets Tier 3 / China Stage III and the engine identity is cross-checked against the chassis plate during the inspection. The drive system runs through the Full Hydrostatic, and the hour reading of 1800 hours is confirmed against the ECU log so the figure on the dashboard matches the recorded history. Oil pressure, coolant temperature and turbo response are logged in the report.

Digging Performance: Depth, Reach and Breakout

Work figures for this Komatsu PC240: 4.68 m maximum dig depth, 7.24 m of reach, and 68 kN of bucket force with the system at 34.3 MPa. The 1.1 m³ bucket matches the machine's rated envelope, and swing rate of 11.5 rpm supports continuous loading cycles. Every hydraulic function is pressure-tested in the audit, and the measured values are recorded with dated photos in the file.

Chassis and Crawler Condition

This Komatsu PC240 runs 450 mm shoes across 3.65 m of track at 32 kPa ground pressure. The undercarriage report records Good condition, healthy links and bushings (450 mm shoes), with each wear item measured and photographed. Track tension and alignment were set during the audit, and seal condition was checked on the rollers and idlers. The 24 Tons unit stays planted on fill and soft material with this footprint.

Operator Station and Routine Checks

The cab is the ROPS / FOPS documented enclosed cab with air conditioning, and the operator environment is set up for sustained production. Fuel capacity is 410 L, and ground clearance of 440 mm handles rough site conditions. The machine is checked for control function, lighting and service access during the inspection. These are the daily-use details that show up on the first week of operation.

Where This Komatsu PC240 Works Best

For utility and agriculture and port programs, the Komatsu PC240 brings the 24 Tons class and the 1.1 m³ configuration, with sales history into Nigeria, Kenya and the wider region. The machine is inspected under the HMP unit-specific protocol before listing, the file is shared with the buyer, and a live walk-around is arranged after your enquiry is reviewed. The quote is confirmed in writing and held for seven days.

The HMP unit-specific inspection and What Ships in the File

Verification for this Komatsu PC240 works in layers: the dated unit-specific inspection material, the hour-meter evidence, where available on the 1800 hour reading, and a live walk-around where the serial number and meter are shown on camera. The engine serial is cross-checked against the chassis plate. An an independent inspection may be coordinated when the inspector, yard access, and buyer requirements allow before loading for buyers who want an independent opinion.

Shipping This Komatsu PC240: CIF Terms and Documents

For Nigeria, Kenya and the wider region deliveries, HMP provides a written CIF quote after your enquiry is reviewed covering freight, port charges and paperwork, and the rate holds for seven days. The unit loads in Shanghai with the export documentation prepared for the destination port, and the buyer receives the inspection file before any deposit is paid.

Service Records and Component History

The 1800 hour reading on this 2023 Komatsu PC240 reflects a machine that has passed its first service cycle, and the maintenance record in the file documents the checks completed at the yard. The HMP report logs the engine oil analysis, filter condition and fluid levels with dated photos. For a used excavator, the value is in this paper trail, and it travels with the sale.

Pre-Purchase Checklist for the Komatsu PC240

Before committing to this Komatsu PC240, confirm: the hour reading of 1800 hours against the hour-meter evidence, where available, the engine serial against the chassis plate, the dated inspection photos, and the CIF quotation for your port. The live walk-around is arranged after your enquiry is reviewed, and the rate is held for seven days while you complete your checks.

Running Costs: Fuel, Service and Wear Items

In the 24 Tons class, operating cost is driven by fuel burn, service parts and wear components. This Komatsu PC240 carries a 410 L fuel tank and a documented service history, and the audit file photographs the condition of the wear items. The buyer sees the full cost profile before the deposit is paid.

Value Position of the Komatsu PC240

This 2023 Komatsu PC240 at 1800 hours has passed its break-in and first service cycle while absorbing the largest depreciation step. The Komatsu SAA6D107E-1 and the working components remain inside their service horizon, and the machine is priced against its documented condition. Buyers in the 24 Tons class get the production capacity at a fraction of new-unit cost.

Parts and Service Support After Delivery

After delivery, parts sourcing for this Komatsu PC240 runs through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, covering consumables and service items for buyers in Nigeria, Kenya and the wider region. The Komatsu SAA6D107E-1 engine family is well stocked by regional distributors, which keeps routine service straightforward. The technical liaison on the order answers maintenance questions after the machine lands.

Dig Cycle Analysis for the Komatsu PC240

For utility and agriculture and port programs, the Komatsu PC240 cycles with a 1.1 m³ bucket at 11.5 rpm swing speed, digging to 4.68 m and reaching 7.24 m. The 68 kN breakout force clears tough material, and the circuit runs at 34.3 MPa. The walk-around video shows the machine working through these cycles, and the report documents the measured values.

Transaction Structure and Regional Support

The sales process for this Komatsu PC240 is documented at every step: inspection file, live video, signed contract, TT deposit, and balance against shipping documents. CIF pricing is confirmed in writing after your enquiry is reviewed and held for seven days. Regional support for Nigeria, Kenya and the wider region buyers includes parts sourcing and the technical liaison after delivery.

Is the Komatsu PC240 Right for Your Program

Operators running this class of excavator report consistent control response and a comfortable working station, which shows up as steady production across utility and agriculture and port programs. For buyers in Nigeria, Kenya and the wider region, the deciding factor is the file: 1800 documented hours, the Komatsu SAA6D107E-1 engine, and the dated inspection report that ships with the 24 Tons machine.

What Arrives with the Machine

With this Komatsu PC240, the buyer receives the machine, the export documentation pack, the dated inspection report, and the maintenance schedule. The hour-meter evidence, where available for the 1800 reading and the ECU scan results are part of the file. The technical liaison remains available after delivery for parts and service questions.

Fleet Standardization on the 24 Tons Class

For fleet managers standardizing on the 24 Tons class, this Komatsu PC240 is a repeatable unit: the 2023 build at 1800 hours, the Komatsu SAA6D107E-1 powertrain and the 1.1 m³ bucket cover the standard program, and the inspection file makes the condition review fast. The machine can be added to an existing order cycle without special handling.

Financing Sequence and Documentation Flow

The financing sequence for this Komatsu PC240 is transparent: the CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days, the deposit is paid by TT after the file review, and the balance follows the export documents. The signed contract states the terms, and the buyer keeps the inspection report as part of the sale package.

Spare Parts Picture for the Komatsu PC240

The spare-parts picture for this Komatsu PC240 is covered through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, and the Komatsu SAA6D107E-1 family has distributor stock in the main target markets. The maintenance schedule provided with the sale lists the service intervals and the parts that fall due at each stage.

Resale Position of the 24 Tons Class

The resale position of the 24 Tons class supports this purchase: demand for documented, low-hour machines in Nigeria, Kenya and the wider region keeps resale values stable, and the 2023 build at 1800 hours with the Komatsu SAA6D107E-1 power unit sits in the most traded bracket of the class. The inspection file travels with the machine to the next owner.

Documentation Pack and Customs Clearance

Customs clearance for this Komatsu PC240 in Nigeria, Kenya or the wider region starts with the export packet HMP prepares at the yard: commercial invoice, packing list, bill of lading and the certificate of origin. The buyer's broker confirms the duty and age rules against the current schedule, and HMP shares the container documents as soon as they are issued.