Used Komatsu PC135C Excavator for Sale

Komatsu PC135C with 1200 hours on the Meter: Unit Overview

The listing covers a Komatsu PC135C at 1200 hours, configured as a 13.5 Tons unit. The HMP unit-specific pre-purchase inspection was completed before listing, and the report travels with the sale. Buyers in Nigeria, Kenya and the wider region can review the file first, watch the machine live on camera, and only then decide on deposit, which is how a used excavator purchase should work.

Engine and Powertrain: Komatsu SAA4D95LE-5

Under the hood sits the Komatsu SAA4D95LE-5, rated at 72.6 kW (97.3 HP). This power plant is checked for compression, oil pressure and cooling system condition during the HMP unit-specific inspection, and the results are photographed and dated. The Tier 3 / China Stage III configuration is confirmed, the drive train uses the Full Hydrostatic, and the 1200 hour reading on the meter is listed against the engine ECU before listing.

Work Cycle: Dig Depth, Force and Swing

The Komatsu PC135C is documented for 4.68 m of dig depth, 7.24 m of reach and 68 kN of bucket force at 34.3 MPa pressure. With the 0.6 m³ bucket fitted and a swing rate of 11.5 rpm, the machine holds a steady production cycle in bulk and trench work. Hydraulic pressures are logged per function in the inspection report, and the values are confirmed against the OEM spec sheet.

Suitable Programs and Target Regions

For mining and quarry and port programs, the Komatsu PC135C brings the 13.5 Tons class and the 0.6 m³ configuration, with sales history into Nigeria, Kenya and the wider region. The machine is inspected under the HMP unit-specific protocol before listing, the file is shared with the buyer, and a live walk-around is arranged after your enquiry is reviewed. The quote is confirmed in writing and held for seven days.

Inspection File and Verification

The Komatsu PC135C ships with the dated HMP unit-specific inspection file: twelve pages of photographed and measured checks covering the engine, pumps, cylinder rods, swing bearing, undercarriage and the hour meter itself. The 1200 reading is backed by the hour-meter evidence, where available. A live video walk-around is arranged after your enquiry is reviewed, and third-party inspection can be booked at the yard if required.

Shipping This Komatsu PC135C: CIF Terms and Documents

The CIF quote for this Komatsu PC135C is itemized: ocean freight, port handling, documentation and insurance, confirmed after your enquiry is reviewed and locked for seven days. The machine ships from Shanghai with the full export packet, and the commercial invoice, packing list and bill of lading are prepared per the destination. Status updates are shared during transit.

Maintenance History and Service Discipline

The 1200 hour reading on this Komatsu PC135C reflects a machine that has passed its first service cycle, and the maintenance record in the file documents the checks completed at the yard. The HMP report logs the engine oil analysis, filter condition and fluid levels with dated photos. For a used excavator, the value is in this paper trail, and it travels with the sale.

The Komatsu PC135C in Continuous Production

In continuous production, the Komatsu PC135C holds a steady cycle: the swing speed of 11.5 rpm and the 0.6 m³ bucket keep trucks cycling without waiting, and the 4.68 m dig depth covers trenching and bulk work alike. The 68 kN bucket force and the reach of 7.24 m handle the geometry of most sites, and the machine is demonstrated in these cycles on the walk-around video before payment.