Used Sany SY55C (Value Pro) Excavator for Sale

The Sany SY55C (Value Pro) at 1400 hours: What You Are Buying

This Sany SY55C (Value Pro) presents 1400 documented hours on a 5.78 Tons platform. The machine carries the available unit-specific inspection material with dated photographs, the hour meter is backed by rollback detection, and a live walk-around is arranged after your enquiry is reviewed. The unit is ready for export from Shanghai, and the CIF price is confirmed in writing for the destination port.

Engine, Emissions and Drive System

Power comes from the Kubota V2607, which is rated at 36 kW (48 HP). The unit meets Tier 3 / China Stage III and the engine identity is cross-checked against the chassis plate during the inspection. The drive system runs through the Full Hydrostatic, and the hour reading of 1400 hours is confirmed against the ECU log so the figure on the dashboard matches the recorded history. Oil pressure, coolant temperature and turbo response are logged in the report.

Work Cycle: Dig Depth, Force and Swing

The excavation envelope of the Sany SY55C (Value Pro) spans 4.68 m in depth and 7.24 m in reach, generating 68 kN of bucket breakout at 34.3 MPa system pressure. The machine carries the 0.21 m³ bucket and swings at 11.5 rpm. The audit verifies each work function against the OEM pressure window, and the results are photographed and dated in the HMP report.

Where This Sany SY55C (Value Pro) Works Best

The Sany SY55C (Value Pro) is configured for mining and quarry and port work, and HMP has active sales into Philippines, Indonesia and the wider region for this machine class. The 0.21 m³ bucket and the 5.78 Tons platform match the standard duty cycles, and the inspection file documents the machine's condition for buyers who cannot fly to the yard. The machine can be shown live on video, and the written quote is confirmed after your enquiry is reviewed.

The HMP unit-specific inspection and What Ships in the File

The Sany SY55C (Value Pro) ships with the dated HMP unit-specific inspection file: twelve pages of photographed and measured checks covering the engine, pumps, cylinder rods, swing bearing, undercarriage and the hour meter itself. The 1400 reading is backed by the hour-meter evidence, where available. A live video walk-around is arranged after your enquiry is reviewed, and third-party inspection can be booked at the yard if required.

Maintenance History and Service Discipline

Service history for this Sany SY55C (Value Pro) is recorded in the inspection file: the 1400 hours on the meter are supported by the hour-meter evidence, where available, and the yard records show the maintenance completed before listing. The report includes dated photographs of the service points, fluid analysis results and the component checks. Buyers review the file before payment.

Pre-Purchase Checklist for the Sany SY55C (Value Pro)

Buyers of this Sany SY55C (Value Pro) typically complete four steps: inspect the dated file, check the meter reading of 1400 hours against the hour-meter evidence, where available, view the machine live on camera, and receive the written CIF quote. The inspection report and the walk-around video are the evidence package, and the deposit is paid only after the buyer has reviewed both.

Cost Profile of the Sany SY55C (Value Pro)

Running costs on this Sany SY55C (Value Pro) are shaped by the 410 L fuel capacity and the service intervals documented in the file. The HMP report verifies the condition of the components that carry the first-year spend: filters, fluids, undercarriage and hydraulic seals. Buyers review this cost profile in the inspection file before payment.

Dig Cycle Analysis for the Sany SY55C (Value Pro)

For mining and quarry and port programs, the Sany SY55C (Value Pro) cycles with a 0.21 m³ bucket at 11.5 rpm swing speed, digging to 4.68 m and reaching 7.24 m. The 68 kN breakout force clears tough material, and the circuit runs at 34.3 MPa. The walk-around video shows the machine working through these cycles, and the report documents the measured values.

Is the Sany SY55C (Value Pro) Right for Your Program

The fit indicators for this Sany SY55C (Value Pro): programs that need mining and quarry and port capacity in the 5.78 Tons class, buyers in Philippines, Indonesia and the wider region who review machines remotely, and fleets that value a dated inspection file over a broker description. The Kubota V2607 powertrain and the 0.21 m³ configuration cover the standard production profile, and the live walk-around lets the buyer confirm before committing.