Sany SY35U (Zero Tail Swing)

The 2023 Sany SY35U (Zero Tail Swing) at 1200 hours: What You Are Buying

This 2023 Sany SY35U (Zero Tail Swing) presents 1200 documented hours on a 3.8 Tons platform. The machine carries the available unit-specific inspection material with dated photographs, the hour meter is backed by rollback detection, and a live walk-around is arranged after your enquiry is reviewed of request. The unit is ready for export from Shanghai, and the CIF price is confirmed in writing for the destination port.

Engine and Powertrain: Yanmar 3TNV88

The Yanmar 3TNV88 delivers 20.4 kW (27 HP) in this 2023 Sany SY35U (Zero Tail Swing). The power unit is inspected for compression, pressure and temperature performance, with results logged in the dated report. The machine meets Tier 3 / China Stage III, uses the Full Hydrostatic, and the hour meter's 1200 hours reading is confirmed against the ECU history as part of the audit process.

Work Cycle: Dig Depth, Force and Swing

The Sany SY35U (Zero Tail Swing) digs to 4.68 m and reaches 7.24 m at ground level, with 68 kN of bucket digging force on a hydraulic system running at 34.3 MPa. The 0.11 m³ bucket suits the standard production profile, and the swing speed of 11.5 rpm keeps cycle times short when trucks are staged close to the face. The hydraulic circuit is function-tested across the full range during the inspection, and the readings are attached to the report.

Undercarriage and Track System

Track figures for the Sany SY35U (Zero Tail Swing): 450 mm shoes, 3.65 m track length and 32 kPa ground pressure. The inspection records the undercarriage condition as Good condition, rubber tracks, with wear measurements photographed and dated. Track tension was set during the audit, and the rollers and idlers were checked for seal condition. The 3.8 Tons machine carries its mass on this running gear.

Cabin, Controls and Service Access

The operator environment is the ROPS / FOPS documented enclosed cab with air conditioning, arranged for production work in hot and dusty conditions. Fuel capacity of 410 L supports full shifts, and 440 mm of ground clearance handles the typical obstacles on a working site. Every control function is checked during the inspection, and the results are recorded with dated photos in the HMP report.

Where This Sany SY35U (Zero Tail Swing) Works Best

For port programs, the Sany SY35U (Zero Tail Swing) brings the 3.8 Tons class and the 0.11 m³ configuration, with sales history into Africa, Latin America and the wider region. The machine is inspected under the HMP unit-specific protocol before listing, the file is shared with the buyer, and a live walk-around is arranged after your enquiry is reviewed. The quote is confirmed in writing and held for seven days.

Inspection File and Verification

The inspection file for this 2023 Sany SY35U (Zero Tail Swing) includes the HMP unit-specific inspection material with dated photographs, the hour-meter evidence, where available for the 1200 reading, and the ECU scan results. The machine can be inspected live on video after your enquiry is reviewed, with the serial number on camera. Third-party survey options are available at the yard before shipment.

Shipping This Sany SY35U (Zero Tail Swing): CIF Terms and Documents

For Africa, Latin America and the wider region deliveries, HMP provides a written CIF quote after your enquiry is reviewed covering freight, port charges and paperwork, and the rate holds for seven days. The unit loads in Shanghai with the export documentation prepared for the destination port, and the buyer receives the inspection file before any deposit is paid.

Service Records and Component History

Service history for this Sany SY35U (Zero Tail Swing) is recorded in the inspection file: the 1200 hours on the meter are supported by the hour-meter evidence, where available, and the yard records show the maintenance completed before listing. The report includes dated photographs of the service points, fluid analysis results and the component checks. Buyers review the file before payment.

What to Verify on This Sany SY35U (Zero Tail Swing) Before Payment

The checklist for this Sany SY35U (Zero Tail Swing) is simple: review the unit-specific inspection material, verify the 1200 hour reading against the hour-meter evidence, where available, watch the live walk-around with the serial on camera, and confirm the CIF quote in writing. HMP arranges the live video after your enquiry is reviewed, and an independent inspection provider can survey the unit before loading. Payment is by TT only after the review is complete.

Operating Costs That Matter in This Class

In the 3.8 Tons class, operating cost is driven by fuel burn, service parts and wear components. This Sany SY35U (Zero Tail Swing) carries a 410 L fuel tank and a documented service history, and the audit file photographs the condition of the wear items. The buyer sees the full cost profile before the deposit is paid.

The Value Story: 1200 Hours on a 2023 Model

The 1200 hour reading on this 2023 Sany SY35U (Zero Tail Swing) sits inside the first major service cycle, which is where used buyers in the 3.8 Tons class see the best balance of condition and price. The Yanmar 3TNV88 powertrain keeps nearly all of its working life, and the inspection file documents the machine's actual state before any deposit.

Maintenance Support for the Sany SY35U (Zero Tail Swing)

After delivery, parts sourcing for this Sany SY35U (Zero Tail Swing) runs through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, covering consumables and service items for buyers in Africa, Latin America and the wider region. The Yanmar 3TNV88 engine family is well stocked by regional distributors, which keeps routine service straightforward. The technical liaison on the order answers maintenance questions after the machine lands.

The Sany SY35U (Zero Tail Swing) in Continuous Production

In continuous production, the Sany SY35U (Zero Tail Swing) holds a steady cycle: the swing speed of 11.5 rpm and the 0.11 m³ bucket keep trucks cycling without waiting, and the 4.68 m dig depth covers trenching and bulk work alike. The 68 kN bucket force and the reach of 7.24 m handle the geometry of most sites, and the machine is demonstrated in these cycles on the walk-around video before payment.

Contract, Payment and Regional Backing

The sales process for this Sany SY35U (Zero Tail Swing) is documented at every step: inspection file, live video, signed contract, TT deposit, and balance against shipping documents. CIF pricing is confirmed in writing after your enquiry is reviewed and held for seven days. Regional support for Africa, Latin America and the wider region buyers includes parts sourcing and the technical liaison after delivery.

Operator Experiences and Fit Signals

Operators running this class of excavator report consistent control response and a comfortable working station, which shows up as steady production across port programs. For buyers in Africa, Latin America and the wider region, the deciding factor is the file: 1200 documented hours, the Yanmar 3TNV88 engine, and the dated inspection report that ships with the 3.8 Tons machine.

What Arrives with the Machine

With this Sany SY35U (Zero Tail Swing), the buyer receives the machine, the export documentation pack, the dated inspection report, and the maintenance schedule. The hour-meter evidence, where available for the 1200 reading and the ECU scan results are part of the file. The technical liaison remains available after delivery for parts and service questions.

Financing Sequence and Documentation Flow

The financing sequence for this Sany SY35U (Zero Tail Swing) is transparent: the CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days, the deposit is paid by TT after the file review, and the balance follows the export documents. The signed contract states the terms, and the buyer keeps the inspection report as part of the sale package.

Documentation Pack and Customs Clearance

Customs clearance for this Sany SY35U (Zero Tail Swing) in Africa, Latin America or the wider region starts with the export packet HMP prepares at the yard: commercial invoice, packing list, bill of lading and the certificate of origin. The buyer's broker confirms the duty and age rules against the current schedule, and HMP shares the container documents as soon as they are issued.

Sailing Schedule and Transit Windows

Weather and seasonality rarely delay this class of shipment from Shanghai: the unit loads on an available sailing schedule after the contract is signed, and the transit time to Africa, Latin America or the wider region is stated in the written CIF quote. Port charges and documentation are itemized in the same document.

Operating Season and Utilization Planning

The operating season for this Sany SY35U (Zero Tail Swing) in Africa, Latin America and the wider region determines when to place the order: machines ordered ahead of the wet season arrive in time for the peak working months, while off-season orders ship with shorter lead times. HMP confirms the sailing date in the written CIF quote before any funds move.