Sany 75C Pro

Buying the 2024 Sany 75C Pro: Condition, Hours and Configuration

This 2024 Sany 75C Pro presents 950 documented hours on a 7.6 Tons platform. The machine carries the available unit-specific inspection material with dated photographs, the hour meter is backed by rollback detection, and a live walk-around is arranged after your enquiry is reviewed of request. The unit is ready for export from Shanghai, and the CIF price is confirmed in writing for the destination port.

Engine, Emissions and Drive System

Power comes from the Isuzu 4JG1 (High Torque Edition), which is rated at 42 kW (56.3 HP). The unit meets Tier 3 / China Stage III and the engine identity is cross-checked against the chassis plate during the inspection. The drive system runs through the Full Hydrostatic, and the hour reading of 950 hours is confirmed against the ECU log so the figure on the dashboard matches the recorded history. Oil pressure, coolant temperature and turbo response are logged in the report.

Work Cycle: Dig Depth, Force and Swing

The Sany 75C Pro is documented for 4.68 m of dig depth, 7.24 m of reach and 68 kN of bucket force at 34.3 MPa pressure. With the 0.32 m³ bucket fitted and a swing rate of 11.5 rpm, the machine holds a steady production cycle in bulk and trench work. Hydraulic pressures are logged per function in the inspection report, and the values are confirmed against the OEM spec sheet.

Undercarriage and Track System

The running gear uses 450 mm track shoes over 3.65 m of track length, holding ground pressure at 32 kPa. The undercarriage condition is documented in the inspection: Good condition, healthy links and bushings (450 mm shoes). Track adjustment was listed during the audit, and roller and idler seals were checked for leaks. For sites with soft fills or abrasive ground, this track package spreads the 7.6 Tons working weight across a longer footprint.

Cabin, Controls and Service Access

The operator environment is the ROPS / FOPS documented enclosed cab with air conditioning, arranged for production work in hot and dusty conditions. Fuel capacity of 410 L supports full shifts, and 440 mm of ground clearance handles the typical obstacles on a working site. Every control function is checked during the inspection, and the results are recorded with dated photos in the HMP report.

Where This Sany 75C Pro Works Best

The Sany 75C Pro suits mining and road construction and port duty, and delivery references for this machine class exist across Africa, Latin America and Middle East. The 0.32 m³ bucket and the 7.6 Tons platform are matched to the working envelope, and the inspection file is shared before payment. Buyers review the machine live on video and confirm the CIF quote in writing before committing.

How This Sany 75C Pro Is Listed

Request evidence for material claims on this page; available information may include the HMP unit-specific pre-purchase inspection report, which is shared before payment. The file covers the engine, hydraulics, running gear and hour meter with date-stamped photographs. The 950 hour reading is listed by rollback detection and can be shown live on camera during the walk-around. If you want an independent layer, an independent inspection provider can survey the machine at the yard before loading.

Shipping This Sany 75C Pro: CIF Terms and Documents

The CIF quote for this Sany 75C Pro is itemized: ocean freight, port handling, documentation and insurance, confirmed after your enquiry is reviewed and locked for seven days. The machine ships from Shanghai with the full export packet, and the commercial invoice, packing list and bill of lading are prepared per the destination. Status updates are shared during transit.

Maintenance Story of This Sany 75C Pro

Service history for this Sany 75C Pro is recorded in the inspection file: the 950 hours on the meter are supported by the hour-meter evidence, where available, and the yard records show the maintenance completed before listing. The report includes dated photographs of the service points, fluid analysis results and the component checks. Buyers review the file before payment.

What to Verify on This Sany 75C Pro Before Payment

Before any funds move, buyers can check four things on this 2024 Sany 75C Pro: the hour-meter evidence, where available for the meter reading of 950 hours, the dated inspection photos of the engine and hydraulics, the serial number shown live on camera, and the written CIF quote itemized for the destination port. The machine is demonstrated live on video after your enquiry is reviewed, and third-party survey can be booked at the yard if you want an independent check.

Running Costs: Fuel, Service and Wear Items

The cost profile of this 2024 Sany 75C Pro is anchored by the 410 L tank and the documented service record. The inspection file itemizes the condition of the wear items and the completed service work, so the first-year operating budget is based on facts rather than guesses. That is the practical value of buying a machine with a full report.

Value Position of the Sany 75C Pro

A 2024 machine at 950 hours has absorbed the heaviest early depreciation while the Isuzu 4JG1 (High Torque Edition) power unit stays inside its major overhaul window. That is the value position of this Sany 75C Pro: production capacity in the 7.6 Tons class at a price well below new-unit pricing, with the condition documented in the inspection file rather than left to a broker's description.

Maintenance Support for the Sany 75C Pro

After delivery, parts sourcing for this Sany 75C Pro runs through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, covering consumables and service items for buyers in Africa, Latin America and Middle East. The Isuzu 4JG1 (High Torque Edition) engine family is well stocked by regional distributors, which keeps routine service straightforward. The technical liaison on the order answers maintenance questions after the machine lands.

The Sany 75C Pro in Continuous Production

For mining and road construction and port programs, the Sany 75C Pro cycles with a 0.32 m³ bucket at 11.5 rpm swing speed, digging to 4.68 m and reaching 7.24 m. The 68 kN breakout force clears tough material, and the circuit runs at 34.3 MPa. The walk-around video shows the machine working through these cycles, and the report documents the measured values.

Transaction Structure and Regional Support

The sales process for this Sany 75C Pro is documented at every step: inspection file, live video, signed contract, TT deposit, and balance against shipping documents. CIF pricing is confirmed in writing after your enquiry is reviewed and held for seven days. Regional support for Africa, Latin America and Middle East buyers includes parts sourcing and the technical liaison after delivery.

Is the Sany 75C Pro Right for Your Program

This 2024 Sany 75C Pro fits buyers running mining and road construction and port programs who want a documented machine rather than a speculative listing: fleets in Africa, Latin America and Middle East that standardize on the 7.6 Tons class, contractors upgrading from smaller units, and operators who need the Isuzu 4JG1 (High Torque Edition) power and the inspection file before paying. Operators describe the class as predictable in the working cycle, with the report confirming the machine's actual state.

Site Logistics and Pre-Delivery Preparation

Site preparation for this Sany 75C Pro is straightforward: the machine lands with the export documentation pack, and the buyer's customs agent clears the unit against the destination rules. HMP shares the container status during transit and confirms the port requirements before loading. For buyers in Africa, Latin America and Middle East, the arrival process is documented end to end.

Financing Sequence and Documentation Flow

The financing sequence for this Sany 75C Pro is transparent: the CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days, the deposit is paid by TT after the file review, and the balance follows the export documents. The signed contract states the terms, and the buyer keeps the inspection report as part of the sale package.

Comparing the Paperwork Before You Decide

Buyers evaluating this Sany 75C Pro against other listings in the 7.6 Tons class should compare the paperwork first: the dated inspection file, the hour-meter evidence, where available on the 950 reading, and the written CIF quote. HMP prepares all three before the deposit is paid, and the machine is shown live on camera during the review.

Fleet Standardization on the 7.6 Tons Class

For fleet managers standardizing on the 7.6 Tons class, this Sany 75C Pro is a repeatable unit: the 2024 build at 950 hours, the Isuzu 4JG1 (High Torque Edition) powertrain and the 0.32 m³ bucket cover the standard program, and the inspection file makes the condition review fast. The machine can be added to an existing order cycle without special handling.

Documentation Pack and Customs Clearance

Customs clearance for this Sany 75C Pro in Africa, Latin America or Middle East starts with the export packet HMP prepares at the yard: commercial invoice, packing list, bill of lading and the certificate of origin. The buyer's broker confirms the duty and age rules against the current schedule, and HMP shares the container documents as soon as they are issued.