Used SANY SY125C Excavator for Sale

This used SANY SY125C excavator is a 12.45-ton-class tracked hydraulic excavator identified by the SY125C model badge visible in the listing photographs. It is listed for US$12,500; the catalogue marks availability as in stock, and the listing shows 980 operating hours. SANY’s SY125C manufacturer brochure gives a reference operating weight of 12,450 kg, a Cummins F4.5 engine with 4.5 L displacement, rated power of 89 kW at 2,200 rpm, and a 0.54 m³ bucket. These are model specifications; verify the serial number, engine plate, actual bucket, meter, machine condition, and configuration of this used unit before purchase.

The photograph shows a yellow SANY crawler excavator with the SY125C marking on the rear body, an enclosed cab, boom, bucket, and tracked undercarriage. The additional catalog photographs show exterior views, the cab, cooling components, and a rear-quarter view. Together, the images help a buyer identify the model and prepare questions for an inspection. They are not proof of mechanical condition, service history, actual operating hours, ownership, or the precise configuration of the machine offered. Request current photographs with the serial/PIN and a live walk-around before committing to a transaction.

A 12.45-ton excavator can be considered for general construction, building foundations, road maintenance, drainage, utility trenching, landscaping, and other earthmoving tasks where its actual reach, bucket, ground pressure, and transport size fit the job. The SY125C brochure figures are useful for initial planning, but the buyer should make decisions using the exact unit’s configuration and inspection evidence. Model-year changes, market-specific variants, attachments, and repairs can affect the machine supplied.

SANY SY125C specifications: manufacturer reference and unit checks

SANY’s published SY125C brochure lists 12,450 kg operating weight, Cummins F4.5 engine, 4.5 L displacement, rated output of 89 kW at 2,200 rpm, and a 0.54 m³ bucket. It also gives a 500 Nm maximum torque range at 1,300–1,700 rpm, 5.5/3.5 km/h high/low travel speed, and 12 rpm swing speed. Treat these values as the manufacturer’s model reference, not a guarantee that every used SY125C has the same installed parts or working configuration.

Before comparing this offer with another used excavator for sale, ask HMP for a clear photo of the machine identification plate and engine plate, then match those details to the applicable SANY document. Confirm the serial/PIN, product suffix, engine model, rated power, emissions label, boom and stick, bucket, track shoe width, and any optional hydraulic lines. If an identification plate is unreadable or the records do not match, resolve the discrepancy before paying. The manufacturer reference should help identify questions; serial-specific evidence should answer them.

The listed 12,450 kg operating weight applies to SANY’s documented model configuration. Shipping weight can differ according to attachments, fuel, counterweight, track shoes, and removed components. Ask for measured dimensions and transport weight for this exact unit before requesting a freight quote. The listed 0.54 m³ bucket is the standard brochure reference; verify the bucket installed on the photographed excavator and whether it is included in the sale. Do not assume the reference bucket is the bucket that will be delivered.

The official SY125C specification brochure is available from SANY Group’s SY125C product document. Brochure values can vary by market, model generation, and equipment package, so a serial-specific source is preferable for the individual machine. HMP should confirm the exact unit’s build information and nameplate data when preparing a written quotation.

What does the US$12,500 listing include?

The current listing price is US$12,500. Confirm in writing whether the figure covers only the excavator at the yard or also includes any bucket, attachment, inspection, inland transport, loading, export preparation, or documentation. Do not treat an online asking price as a landed cost. Ocean freight, insurance, port handling, customs duty, taxes, broker fees, storage, and inland delivery are separate unless an itemized contract or quotation explicitly includes them.

The catalogue marks this record as in stock as of its last update. Because inventory can change, reconfirm that this exact serial-numbered SY125C remains available before arranging travel, inspection, or payment. Ask for the current yard location and a dated photo set. If a deposit is required to reserve the unit, confirm the refund or remedy terms for a material difference between the machine and the signed description.

The page shows 980 operating hours. This is a listing figure and should not be treated as independently verified unless HMP supplies evidence. Request a clear dashboard photograph with the meter powered on, a continuous video showing start-up and the meter, and any available service or electronic records linked to the same serial/PIN. Compare the reading with wear on the pedals, joysticks, seat, track shoes, rollers, sprockets, idlers, bucket linkage, and boom pins. Wear is only one cross-check; work conditions and maintenance also influence component condition.

If the meter has been changed, repaired, or reset, ask for a written explanation and documents that support the reported hours. Record the meter reading and the evidence supplied in the purchase agreement. A low number without traceable records should not be used as the sole measure of remaining service life. A careful buyer evaluates the machine’s identity, maintenance, function, and wear together rather than deciding from one number.

Applications and job-fit planning

Contractors considering a SANY SY125C for construction work should begin with the job plan: digging depth, required reach, soil or rock type, trench width, site access, loading height, truck availability, and daily production target. The 0.54 m³ brochure bucket is a starting point for matching capacity, not a universal recommendation. A different bucket, coupler, or auxiliary hydraulic attachment changes how the machine performs and what must be inspected.

For road construction and maintenance, review access along the work zone, ground bearing, side slope, and how the excavator will move between cuts. For drainage and utility work, check planned trench dimensions, underground service procedures, and the distance to spoil placement. For foundations, compare the project’s required depth and working radius with the machine’s actual boom and stick arrangement. For landscaping or small civil projects, consider transport dimensions, trailer capacity, loading arrangements, and access restrictions at the worksite.

Do not infer digging range or lift capacity solely from the SY125C model name. Obtain the correct chart for the exact configuration and have a competent professional confirm suitability for any lifting operation. Lifting limits depend on radius, working direction, ground level, bucket or attachment, track position, and machine condition. This listing does not certify the excavator for lifting or another regulated application.

Compare the SY125C with other 10–13 tonne machines using a consistent set of facts: confirmed operating weight, engine, output, bucket, working equipment, hours evidence, undercarriage state, inspection findings, parts availability, and total delivered price. The best-value used excavator is not necessarily the one with the lowest asking price. A machine that fits the application, has verifiable identity, and can be supported locally may have lower overall risk than a superficially cheaper unit with unknown condition.

Pre-purchase inspection checklist for a used SY125C

Identity and paperwork: Photograph the serial/PIN plate in context, the engine plate, and the hour meter. Match the machine number to the quotation, invoice, inspection report, and export documents. Confirm the model suffix and applicable SANY brochure. Check that ownership and export paperwork identify the same unit. A badge photograph is useful, but it does not replace serial-number verification.

Engine and cooling: If practical, inspect a cold start and observe warm operation. Request a continuous video showing the dashboard, engine bay, exhaust, and safe operation. Look for visible leaks, damaged hoses, loose wiring, warning indicators, unusual smoke after warm-up, or abnormal noise. Confirm engine oil and coolant condition during a professional inspection. The Cummins F4.5 reference comes from SANY’s SY125C brochure; the engine plate on the actual excavator should confirm the installed engine before that reference is applied to the unit.

Hydraulic functions: Have an operator demonstrate boom, stick, bucket, swing, and travel in both directions under safe conditions. A qualified inspector should note response, drift, noises, leaks, temperature, and functions that could not be tested. Inspect cylinder rods and hoses for damage and leakage. Ask whether auxiliary hydraulic lines are fitted and test them if they are part of the agreed sale. A short idle video cannot establish that the machine will perform reliably under sustained workload.

Front attachment and frame: Check the boom, stick, bucket, linkage, pins, weld areas, swing-bearing region, counterweight, and main frame for cracks, deformation, excessive play, or undocumented repairs. Confirm the exact bucket supplied and inspect teeth, cutting edge, and side plates. If a quick coupler or additional attachment is included, identify it in the contract and verify its operation. Record visible defects with dated close-up photos.

Undercarriage: Inspect track links, shoes, rollers, idlers, sprockets, tension, guards, and drive areas on both sides. Request wear measurements or an inspector’s written assessment rather than relying on a general “good condition” statement. Look for uneven wear, missing fasteners, damage, leakage, and recent component replacements. Undercarriage condition can materially affect future repair costs and should be included in the negotiated purchase assessment.

Cab and safety equipment: Test the monitor, switches, joystick controls, pedals, seat belt, seat adjustment, door and window latches, mirrors, cameras if fitted, horn, lights, wipers, air conditioning, access steps, and safety devices. The supplied cab image shows visible interior features but cannot prove that every control works. List any item that is damaged, missing, or untested and agree in writing whether it will be repaired before dispatch.

Evidence package: Request a dated inspection report tied to the same serial/PIN and meter reading. If you cannot visit, arrange a live walk-around or independent inspection with an agreed scope, test plan, report format, and acceptance criteria. Confirm who pays for the inspection and how material discrepancies are handled. Keep copies of all photographs, videos, reports, invoices, and correspondence associated with the unit.

Shipping a SANY SY125C from China

Shipping arrangements depend on actual transport dimensions, machine weight, attachments, port capability, destination, and vessel availability. Obtain measured dimensions for the exact SY125C rather than planning from a generic brochure. Ask the freight forwarder whether the machine can travel intact or whether the bucket, boom, or another component must be removed. Confirm lifting points, securing method, cargo preparation, and responsibility for loading and reassembly before the shipment is booked.

Request itemized FOB, CFR, or CIF quotations to a named port and ask which Incoterms edition applies. Clarify ocean freight validity, cargo insurance scope, origin port charges, destination charges, customs clearance, duties, taxes, and inland delivery. CIF generally covers agreed cost, insurance, and freight to the named port; it does not automatically include every local expense. Rates and schedules change, so obtain a current quotation and verify import requirements with a qualified customs broker in the destination country.

Before dispatch, compare the machine’s final inspection record and loading photographs with the contract. Record the serial/PIN, meter reading, included bucket and attachments, visible condition, and any agreed repair. Keep the commercial invoice, packing list, bill of lading, origin documents where required, inspection report, and payment records together. Independently verify any changes to bank details through a previously confirmed contact channel.

How to request a quote

For a useful response, share your destination country and port, intended application, attachment requirements, preferred inspection method, and whether you need FOB, CFR, or CIF pricing. Ask HMP to confirm the current stock status, serial/PIN, engine plate, meter evidence, machine dimensions, included equipment, and the exact brochure variant. Specific questions help distinguish confirmed unit facts from model-level references.

HEAVY MACHINERY PRO is based in Hefei, Anhui, China. Confirm where this exact SY125C is currently held before planning a visit, because inventory and yard locations can change. If the purchase is remote, request recent unit-specific evidence and consider an independent inspection. Agree the payment milestones, delivery point, inspection remedy, and documents before funds are sent.

Frequently asked questions

What is this used SANY SY125C excavator?

It is a used tracked hydraulic excavator identified as SANY SY125C in the listing image. It is listed at US$12,500; the catalogue marks availability as in stock and displays 980 hours as a listing figure. Verify the specific unit’s serial number, meter, condition, and equipment before purchase.

What are the SANY SY125C engine and operating-weight specifications?

SANY’s SY125C brochure reference lists 12,450 kg operating weight, a Cummins F4.5 4.5 L engine, 89 kW at 2,200 rpm, and a 0.54 m³ bucket. Confirm that this unit matches the brochure variant by checking its serial/PIN and engine plate.

Are the 980 hours verified?

980 hours is the current listing figure, not a claim of independent verification. Request a clear current meter photo or video and supporting service or electronic records tied to the same machine serial/PIN.

Is this SY125C in stock, and what does US$12,500 include?

The catalogue lists this record as in stock at US$12,500. Reconfirm availability and ask for a written list of included equipment, inspection, loading, and export services. Shipping and destination charges are excluded unless the quotation explicitly includes them.

What should I inspect before buying a used SANY SY125C?

Verify identity, engine plate, hour meter, cold start, hydraulics, boom and bucket linkage, undercarriage wear, cab controls, safety equipment, and the export documents. Use an agreed inspection report tied to the same unit.

Can the SY125C be shipped to my country?

Ask for a current route-specific quote based on measured machine dimensions, weight, loading plan, and destination port. Check used-equipment import rules with a qualified customs broker in your country.