Used Caterpillar 340D2L Excavator for Sale

The Caterpillar 340D2L in the 40.2 Tons Class: Overview

This Caterpillar 340D2L is showing 1400 hours on the meter, with the available hour-meter evidence in the file. It is a 40.2 Tons machine in the excavator class, and the unit sits in the Shanghai yard with a dated available unit-specific inspection material ready to share. Every figure on this unit is supported by evidence — a logged hour reading, date-stamped inspection photos, and an on-request live demonstration ahead of payment.

Engine, Emissions and Drive System

Propulsion is handled by the CAT C9 ACERT, which develops 208 kW (279 HP) in this configuration. The unit complies with Tier 3 / China Stage III, and the engine serial is documented against the chassis plate. The Full Hydrostatic delivers drive power, and the 1400 hour reading is listed by ECU scan rather than by the dashboard alone. Engine oil analysis is included in the inspection record for this machine.

Hydraulics and Excavation Figures

Work figures for this Caterpillar 340D2L: 4.68 m maximum dig depth, 7.24 m of reach, and 68 kN of bucket force with the system at 34.3 MPa. The 2.3 m³ bucket matches the machine's rated envelope, and swing rate of 11.5 rpm supports continuous loading cycles. Every hydraulic function is pressure-tested in the audit, and the measured values are recorded with dated photos in the file.

Undercarriage and Track System

This Caterpillar 340D2L runs 450 mm shoes across 3.65 m of track at 32 kPa ground pressure. The undercarriage report records Good condition, healthy links and bushings (450 mm shoes), with each wear item measured and photographed. Track tension and alignment were set during the audit, and seal condition was checked on the rollers and idlers. The 40.2 Tons unit stays planted on fill and soft material with this footprint.

Applications and Markets for This excavator

For mining and quarry and port programs, the Caterpillar 340D2L brings the 40.2 Tons class and the 2.3 m³ configuration, with sales history into South Africa, Africa and Zambia. The machine is inspected under the HMP unit-specific protocol before listing, the file is shared with the buyer, and a live walk-around is arranged after your enquiry is reviewed. The quote is confirmed in writing and held for seven days.

Inspection File and Verification

Verification for this Caterpillar 340D2L works in layers: the dated unit-specific inspection material, the hour-meter evidence, where available on the 1400 hour reading, and a live walk-around where the serial number and meter are shown on camera. The engine serial is cross-checked against the chassis plate. An independent inspection may be coordinated when the inspector, yard access, and buyer requirements allow before loading for buyers who want an independent opinion.

Freight, Documents and Delivery from Shanghai

The CIF quote for this Caterpillar 340D2L is itemized: ocean freight, port handling, documentation and insurance, confirmed after your enquiry is reviewed and locked for seven days. The machine ships from Shanghai with the full export packet, and the commercial invoice, packing list and bill of lading are prepared per the destination. Status updates are shared during transit.

Maintenance Story of This Caterpillar 340D2L

The 1400 hour reading on this Caterpillar 340D2L reflects a machine that has passed its first service cycle, and the maintenance record in the file documents the checks completed at the yard. The HMP report logs the engine oil analysis, filter condition and fluid levels with dated photos. For a used excavator, the value is in this paper trail, and it travels with the sale.

What to Verify on This Caterpillar 340D2L Before Payment

Before any funds move, buyers can check four things on this Caterpillar 340D2L: the hour-meter evidence, where available, meter reading of 1400 hours, the dated inspection photos of the engine and hydraulics, the serial number shown live on camera, and the written CIF quote itemized for the destination port. The machine is demonstrated live on video after your enquiry is reviewed, and third-party survey can be booked at the yard if you want an independent check.

Running Costs: Fuel, Service and Wear Items

In the 40.2 Tons class, operating cost is driven by fuel burn, service parts and wear components. This Caterpillar 340D2L carries a 410 L fuel tank and a documented service history, and the audit file photographs the condition of the wear items. The buyer sees the full cost profile before the deposit is paid.