Caterpillar 330GC

The 2024 Caterpillar 330GC at 850 hours: What You Are Buying

The listing covers a 2024 Caterpillar 330GC at 850 hours, configured as a 30.6 Tons unit. The HMP unit-specific pre-purchase inspection was completed before listing, and the report travels with the sale. Buyers in Nigeria, Kenya and the wider region can review the file first, watch the machine live on camera, and only then decide on deposit, which is how a used excavator purchase should work.

Engine and Powertrain: CAT C7.1 ACERT

The Caterpillar 330GC is driven by the CAT C7.1 ACERT developing 151 kW (202 HP). The power unit is listed against the OEM serial records, and the Tier 3 / China Stage III rating is documented in the file. The Full Hydrostatic layout is standard for the class, and the meter's 850 hours reading is cross-checked by ECU scan during the audit. The inspection report logs the engine pressures and temperatures at running temperature.

Excavation Envelope and Cycle Speeds

The excavation envelope of the Caterpillar 330GC spans 4.68 m in depth and 7.24 m in reach, generating 68 kN of bucket breakout at 34.3 MPa system pressure. The machine carries the 1.85 m³ bucket and swings at 11.5 rpm. The audit verifies each work function against the OEM pressure window, and the results are photographed and dated in the HMP report.

Track Running Gear: Shoes, Length and Pressure

This Caterpillar 330GC runs 450 mm shoes across 3.65 m of track at 32 kPa ground pressure. The undercarriage report records Good condition, healthy links and bushings (450 mm shoes), with each wear item measured and photographed. Track tension and alignment were set during the audit, and seal condition was checked on the rollers and idlers. The 30.6 Tons unit stays planted on fill and soft material with this footprint.

Cabin, Controls and Service Access

The cab is the ROPS / FOPS documented enclosed cab with air conditioning, and the operator environment is set up for sustained production. Fuel capacity is 410 L, and ground clearance of 440 mm handles rough site conditions. The machine is checked for control function, lighting and service access during the inspection. These are the daily-use details that show up on the first week of operation.

Suitable Programs and Target Regions

In practice, this Caterpillar 330GC covers mining and quarry and port programs well, and HMP ships this class of excavator to buyers in Nigeria, Kenya and the wider region. The 30.6 Tons working weight and the 1.85 m³ configuration fit the production profile, and the audit report is available before any deposit. The unit is demonstrated live on camera before the export paperwork begins.

The HMP unit-specific inspection and What Ships in the File

The inspection file for this 2024 Caterpillar 330GC includes the HMP unit-specific inspection material with dated photographs, the hour-meter evidence, where available for the 850 reading, and the ECU scan results. The machine can be inspected live on video after your enquiry is reviewed, with the serial number on camera. Third-party survey options are available at the yard before shipment.

CIF Shipping and Export Documentation

The CIF quote for this Caterpillar 330GC is itemized: ocean freight, port handling, documentation and insurance, confirmed after your enquiry is reviewed and locked for seven days. The machine ships from Shanghai with the full export packet, and the commercial invoice, packing list and bill of lading are prepared per the destination. Status updates are shared during transit.

Maintenance History and Service Discipline

Service history for this Caterpillar 330GC is recorded in the inspection file: the 850 hours on the meter are supported by the hour-meter evidence, where available, and the yard records show the maintenance completed before listing. The report includes dated photographs of the service points, fluid analysis results and the component checks. Buyers review the file before payment.

Pre-Purchase Checklist for the Caterpillar 330GC

Before any funds move, buyers can check four things on this 2024 Caterpillar 330GC: the hour-meter evidence, where available for the meter reading of 850 hours, the dated inspection photos of the engine and hydraulics, the serial number shown live on camera, and the written CIF quote itemized for the destination port. The machine is demonstrated live on video after your enquiry is reviewed, and third-party survey can be booked at the yard if you want an independent check.

Cost Profile of the Caterpillar 330GC

The cost profile of this 2024 Caterpillar 330GC is anchored by the 410 L tank and the documented service record. The inspection file itemizes the condition of the wear items and the completed service work, so the first-year operating budget is based on facts rather than guesses. That is the practical value of buying a machine with a full report.

Value Position of the Caterpillar 330GC

This 2024 Caterpillar 330GC at 850 hours has passed its break-in and first service cycle while absorbing the largest depreciation step. The CAT C7.1 ACERT and the working components remain inside their service horizon, and the machine is priced against its documented condition. Buyers in the 30.6 Tons class get the production capacity at a fraction of new-unit cost.

Parts and Service Support After Delivery

After delivery, parts sourcing for this Caterpillar 330GC runs through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, covering consumables and service items for buyers in Nigeria, Kenya and the wider region. The CAT C7.1 ACERT engine family is well stocked by regional distributors, which keeps routine service straightforward. The technical liaison on the order answers maintenance questions after the machine lands.

The Caterpillar 330GC in Continuous Production

In continuous production, the Caterpillar 330GC holds a steady cycle: the swing speed of 11.5 rpm and the 1.85 m³ bucket keep trucks cycling without waiting, and the 4.68 m dig depth covers trenching and bulk work alike. The 68 kN bucket force and the reach of 7.24 m handle the geometry of most sites, and the machine is demonstrated in these cycles on the walk-around video before payment.

Contract, Payment and Regional Backing

This Caterpillar 330GC is sold through a transparent sequence: the buyer reviews the file and the video first, then signs the contract, pays by TT, and settles the balance against the export documents. The written CIF quote is held for seven days, and the technical liaison provides regional support for Nigeria, Kenya and the wider region after the machine arrives.

Who Should Buy This Machine: Fit Indicators

Operators running this class of excavator report consistent control response and a comfortable working station, which shows up as steady production across mining and quarry and port programs. For buyers in Nigeria, Kenya and the wider region, the deciding factor is the file: 850 documented hours, the CAT C7.1 ACERT engine, and the dated inspection report that ships with the 30.6 Tons machine.

Financing Sequence and Documentation Flow

The financing sequence for this Caterpillar 330GC is transparent: the CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days, the deposit is paid by TT after the file review, and the balance follows the export documents. The signed contract states the terms, and the buyer keeps the inspection report as part of the sale package.

Documentation Pack and Customs Clearance

Customs clearance for this Caterpillar 330GC in Nigeria, Kenya or the wider region starts with the export packet HMP prepares at the yard: commercial invoice, packing list, bill of lading and the certificate of origin. The buyer's broker confirms the duty and age rules against the current schedule, and HMP shares the container documents as soon as they are issued.

Fleet Standardization on the 30.6 Tons Class

For fleet managers standardizing on the 30.6 Tons class, this Caterpillar 330GC is a repeatable unit: the 2024 build at 850 hours, the CAT C7.1 ACERT powertrain and the 1.85 m³ bucket cover the standard program, and the inspection file makes the condition review fast. The machine can be added to an existing order cycle without special handling.

Spare Parts Picture for the Caterpillar 330GC

The spare-parts picture for this Caterpillar 330GC is covered through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, and the CAT C7.1 ACERT family has distributor stock in the main target markets. The maintenance schedule provided with the sale lists the service intervals and the parts that fall due at each stage.

Resale Position of the 30.6 Tons Class

The resale position of the 30.6 Tons class supports this purchase: demand for documented, low-hour machines in Nigeria, Kenya and the wider region keeps resale values stable, and the 2024 build at 850 hours with the CAT C7.1 ACERT power unit sits in the most traded bracket of the class. The inspection file travels with the machine to the next owner.

Sailing Schedule and Transit Windows

Weather and seasonality rarely delay this class of shipment from Shanghai: the unit loads on an available sailing schedule after the contract is signed, and the transit time to Nigeria, Kenya or the wider region is stated in the written CIF quote. Port charges and documentation are itemized in the same document.