Caterpillar 320EL

2023 Caterpillar 320EL with 1400 hours on the Meter: Unit Overview

The listing covers a 2023 Caterpillar 320EL at 1400 hours, configured as a 22.5 Tons unit. The HMP unit-specific pre-purchase inspection was completed before listing, and the report travels with the sale. Buyers in Nigeria, Kenya and the wider region can review the file first, watch the machine live on camera, and only then decide on deposit, which is how a used excavator purchase should work.

Engine, Emissions and Drive System

The CAT C6.6 ACERT delivers 113 kW (152 HP) in this 2023 Caterpillar 320EL. The power unit is inspected for compression, pressure and temperature performance, with results logged in the dated report. The machine meets Tier 3 / China Stage III, uses the Full Hydrostatic, and the hour meter's 1400 hours reading is confirmed against the ECU history as part of the audit process.

Hydraulics and Excavation Figures

On the dig cycle, this Caterpillar 320EL reaches 4.68 m below grade with 7.24 m of horizontal reach and 68 kN of bucket force. The hydraulic system operates at 34.3 MPa, and the 1.15 m³ bucket is the standard fitment. Swing speed of 11.5 rpm keeps the loader cycle flowing. The inspection documents hydraulic pressures at every function with time-stamped readings.

Track Running Gear: Shoes, Length and Pressure

This Caterpillar 320EL runs 450 mm shoes across 3.65 m of track at 32 kPa ground pressure. The undercarriage report records Good condition, healthy links and bushings (450 mm shoes), with each wear item measured and photographed. Track tension and alignment were set during the audit, and seal condition was checked on the rollers and idlers. The 22.5 Tons unit stays planted on fill and soft material with this footprint.

Operator Station and Routine Checks

The operator environment is the ROPS / FOPS documented enclosed cab with air conditioning, arranged for production work in hot and dusty conditions. Fuel capacity of 410 L supports full shifts, and 440 mm of ground clearance handles the typical obstacles on a working site. Every control function is checked during the inspection, and the results are recorded with dated photos in the HMP report.

Where This Caterpillar 320EL Works Best

The Caterpillar 320EL suits port and grading duty, and delivery references for this machine class exist across Nigeria, Kenya and the wider region. The 1.15 m³ bucket and the 22.5 Tons platform are matched to the working envelope, and the inspection file is shared before payment. Buyers review the machine live on video and confirm the CIF quote in writing before committing.

The HMP unit-specific inspection and What Ships in the File

The 2023 Caterpillar 320EL ships with the dated HMP unit-specific inspection file: twelve pages of photographed and measured checks covering the engine, pumps, cylinder rods, swing bearing, undercarriage and the hour meter itself. The 1400 reading is backed by the hour-meter evidence, where available. A live video walk-around is arranged after your enquiry is reviewed, and third-party inspection can be booked at the yard if required.

Freight, Documents and Delivery from Shanghai

The CIF quote for this Caterpillar 320EL is itemized: ocean freight, port handling, documentation and insurance, confirmed after your enquiry is reviewed and locked for seven days. The machine ships from Shanghai with the full export packet, and the commercial invoice, packing list and bill of lading are prepared per the destination. Status updates are shared during transit.

Maintenance Story of This Caterpillar 320EL

This 2023 Caterpillar 320EL at 1400 hours carries a documented service record. The audit file logs the oil and coolant analysis, filter service and fluid levels, with date-stamped photos of each check. The maintenance history is part of the sale package, so the buyer knows exactly what was done at the yard before the machine was listed.

Buyer's Checklist: Testing This Caterpillar 320EL Before You Commit

The checklist for this Caterpillar 320EL is simple: review the unit-specific inspection material, verify the 1400 hour reading against the hour-meter evidence, where available, watch the live walk-around with the serial on camera, and confirm the CIF quote in writing. HMP arranges the live video after your enquiry is reviewed, and an independent inspection provider can survey the unit before loading. Payment is by TT only after the review is complete.

Operating Costs That Matter in This Class

For a 22.5 Tons machine in the excavator class, the cost levers are fuel, service intervals and wear items. The 410 L fuel tank supports the shift pattern, and the service schedule is documented in the file. The inspection report confirms the condition of the wear-critical components, which is the part that protects the buyer from surprise spend in the first year of operation.

Why This 2023 Caterpillar 320EL Sits Where It Does in Value

This 2023 Caterpillar 320EL at 1400 hours has passed its break-in and first service cycle while absorbing the largest depreciation step. The CAT C6.6 ACERT and the working components remain inside their service horizon, and the machine is priced against its documented condition. Buyers in the 22.5 Tons class get the production capacity at a fraction of new-unit cost.

Maintenance Support for the Caterpillar 320EL

After delivery, parts sourcing for this Caterpillar 320EL runs through HMP trade accounts in Shanghai, Guangzhou and Hong Kong, covering consumables and service items for buyers in Nigeria, Kenya and the wider region. The CAT C6.6 ACERT engine family is well stocked by regional distributors, which keeps routine service straightforward. The technical liaison on the order answers maintenance questions after the machine lands.

The Caterpillar 320EL in Continuous Production

The production profile of this Caterpillar 320EL is built around the 1.15 m³ bucket and the swing rate of 11.5 rpm. The machine digs to 4.68 m and loads through 7.24 m of reach with 68 kN of force at the bucket. The hydraulic system at 34.3 MPa is function-tested in the audit, and the cycle figures are the ones recorded in the file.

Transaction Structure and Regional Support

For buyers in Nigeria, Kenya and the wider region, the transaction is structured the same way: the report and video review come first, the signed contract states the terms, and payment by TT follows. The balance is settled against the export documents, and the post-sale support scope, where offered, is written into the signed contract. The technical liaison stays on the order through delivery.

Is the Caterpillar 320EL Right for Your Program

This 2023 Caterpillar 320EL fits buyers running port and grading programs who want a documented machine rather than a speculative listing: fleets in Nigeria, Kenya and the wider region that standardize on the 22.5 Tons class, contractors upgrading from smaller units, and operators who need the CAT C6.6 ACERT power and the inspection file before paying. Operators describe the class as predictable in the working cycle, with the report confirming the machine's actual state.

Operating Season and Utilization Planning

The operating season for this Caterpillar 320EL in Nigeria, Kenya and the wider region determines when to place the order: machines ordered ahead of the wet season arrive in time for the peak working months, while off-season orders ship with shorter lead times. HMP confirms the sailing date in the written CIF quote before any funds move.

What Arrives with the Machine

With this Caterpillar 320EL, the buyer receives the machine, the export documentation pack, the dated inspection report, and the maintenance schedule. The hour-meter evidence, where available for the 1400 reading and the ECU scan results are part of the file. The technical liaison remains available after delivery for parts and service questions.

Rental Comparison and Ownership Math

Comparing this Caterpillar 320EL against rental over a full season, the ownership math favors the machine when utilization is steady: the 22.5 Tons class unit carries its own maintenance record, and the inspection file removes the condition risk that usually drives the rental-versus-buy decision. The CAT C6.6 ACERT powertrain and the documented 1400 hours support that calculation.

Financing Sequence and Documentation Flow

The financing sequence for this Caterpillar 320EL is transparent: the CIF quote is confirmed in writing after your enquiry is reviewed and held for seven days, the deposit is paid by TT after the file review, and the balance follows the export documents. The signed contract states the terms, and the buyer keeps the inspection report as part of the sale package.

Site Logistics and Pre-Delivery Preparation

Site preparation for this Caterpillar 320EL is straightforward: the machine lands with the export documentation pack, and the buyer's customs agent clears the unit against the destination rules. HMP shares the container status during transit and confirms the port requirements before loading. For buyers in Nigeria, Kenya and the wider region, the arrival process is documented end to end.

Resale Position of the 22.5 Tons Class

The resale position of the 22.5 Tons class supports this purchase: demand for documented, low-hour machines in Nigeria, Kenya and the wider region keeps resale values stable, and the 2023 build at 1400 hours with the CAT C6.6 ACERT power unit sits in the most traded bracket of the class. The inspection file travels with the machine to the next owner.